Install Lower Cable In Seat Upright Assembly - Pacific Zuma Assembly And Maintenance Manual

Zuma Assembly and Maintenance Guide
9. Install Lower Cable in Seat
Upright Assembly
A. Attach the Foot Plate and one 3½-inch pulley to the
Seat Upright Assembly through the top hole using
one 4¼-inch bolt
two washers
one cable retainer
one ½-inch barrel spacer
one locknut
Finger tighten.
B. Slip the Lower Cable 42760-102 around the pulley.
C. Attach the Foot Plate to the Seat Upright Assembly
using
two 3-inch bolts
four washers
two locknuts
Finger tighten.
D. Wrench tighten the top and bottom bolts.
E. Feed one end of the Lower Cable through the
window in the Leg Extension Arm.
Step 9. Install Lower Cable in Seat Upright Assembly
Seat Upright
Assembly
Lower Cable
42760-102
1 - 3½" pulley
A
1 - 4¼" bolt
2 - washers
1 - cable retainer
1 - ½" barrel spacer
1 - locknut
1 2 3
Foot Plate
2 - 3" bolts
C
4 - washers
2 - locknuts
4 5 6
page 20