Pacific Zuma Assembly And Maintenance Manual page 21

Zuma Assembly and Maintenance Guide
F. Attach one 3½-inch pulley over the Cable in the
Leg Extension Arm window using
one 2½-inch bolt
two ³⁄₈-inch step spacers
one locknut
Wrench tighten.
G. Insert a bolt under the pulley in the Leg Extension
Arm to serve as a cable retainer using
one 2½-inch bolt
two washers
one locknut
Make sure that the Cable passes between the
pulley and the bolt. Wrench tighten.
H. Feed the other end of the Lower Cable through the
window at the base of the Main Upright.
I. Attach one 3½-inch pulley to the Angled Pulley
Bracket at the base of the Main Upright using
one 3¼-inch bolt
two ½-inch barrel spacers
two washers
one locknut
Wrench tighten the bolt.
Step 9. Install Lower Cable in Seat Upright Assembly, Continued
Leg Extension Arm
E
1 - 2½" bolt
G
2 - washers
1 - locknut
1 2
1 - 3½" pulley
1 - 3¼" bolt I
2 - ½" barrel
spacers
2 - washers
1 - locknut
H
Angled Pulley
Bracket on Main
1 - 3½" pulley
Upright
F
1 - 2½" bolt
2 - ³⁄₈" step spacers
1 - locknut
3 4 5
Main Upright
6
page 21