Advertisement
3. Check both sides of the dipstick, and read the lower
level. "he fluid level must be in the cross-hatched area.
4. If the fluid level is in the acceptable range, push
the dipstick back in a11 the way. Replace the air
cleaner assembly.
Refer to the Maintenance Schedule to determine what kind
of transaxle fluid to use. See "Recommended Fluids and
Lubricants" in the Maintenance Schedule booklet.
If'
the fluid level is low, add only enough of the proper fluid to
bring the level into the cross-hatched area on the dipstick.
1. Pull
OW
the dipstick.
2. Using a long-neck funnel, add enough fluid at the
dipstick hole to bring it to the proper level.
It doesn't take much fluid, generally less than one pint
(0.5 L). Don't oveflll.
3. After adding fluid, recheck the fluid level as
described under "How
to
Check."
4.
When the correct fluid level is obtained, push the
dipstick back in all the way.
Advertisement
