Advertisement
4. With the coolant surge tank pressure cap off, start the
engine and let
it run
until you can feel the upper
radiator hose getting hot. Watch out for the
engine fans.
By this time, the coolant level inside the coolant
surge tank may be lower. If the level is lower, add
more of the proper mix to the coolant surge tank
until the level reaches about 2.5 inches (6.4 cm)
below the base of the filler neck.
5. Then replace the pressure cap. Be sure the
~ Q W S
on
Start the engine and allow it to warm up. If the CHECK
COOLANT LEVEL message does not appear on the
Driver Infomation Center, coolant is at the proper
fill
level. If
a
CHECK COOLANT LEVEL message
does
appear, repeat Steps 1 through 3 or see your dealer.
the pressure cap line up like this.
-2
Advertisement
