Transport Mode - Invacare Softform Active 2 RX User Manual

Hide thumbs Also See for Softform Active 2 RX:

Table of Contents

Mattress will start to deflate. The deflation time is

20 seconds.

4. When CPR is complete reactivate the system following

section 4.2 Installing the system, page 8 .

5.4 Transport Mode

If it is necessary to move the bed or mattress simply:

1. Turn off power supply.

2. Disconnect control unit power lead (if necessary the air

hose).

3. When system is ready to reactivate following section 4.2

Installing the system, page 8 .

1627707-D

Air supply hose should be stored by attaching to the fastener

at foot of the mattress.

For Active Care mattress, the air hose is located inside the

mattress. To access the hose Unzip the mattress take out

hose and connect to the control unit, ensure that zip is

closed once connection is made.

Usage

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Softform Active 2 RX and is the answer not in the manual?

Softform premier active 2 with rx pump