Login And Authentication; Figure 4-3 Ebox Login Page - Acom eBox User Manual

Login and Authentication

4.2.
Authentication is required for amplifier remote control through the ACOM eBox web interface or to
change/set the eBox device settings.
To log-in, please, click on Login link (see
pop-up (see

Figure 4-3 eBox Login page

There are two levels of authentication (access levels) - User and Administrator. For your daily work with
the device, it is recommended to use the User level.
To access the eBox web-interface you need the following default data (factory settings):
User authentication level
•
User name:
-
Password:
-
Administrator authentication level
•
User name:
-
Password:
-
The User authentication level has full access to the Settings  Amplifier menu (amplifier controls - Power
on/off, Changing bands, Selecting visible measurements, etc.), however its rights to the Settings  Device
menu are limited only to reviewing the eBox device and network status, setting up the interface refresh
rate and set up the average and peak adjustments.
The Administrator authentication level has full access to all settings of the device.
Page 24 of 60 | S e c t i o n ON-LINE CONNECTION
User's Manual | ACOM eBox | Ethernet Remote Control Device
Figure 4-1 eBox web-interface access
).
Figure 4-3 eBox Login page
Figure 4-3 eBox Login page
user
pass
admin
pass
, Pos. (2)). The Login window will
October 2021