Figure 5-2 Ebox Reboot Page - Acom eBox User Manual

c) General panel
This panel (see Figure 5-1 eBox Settings  Device menu
can change all available fields: Call Sign, Time Zone, Admin Name, Admin Password, User Name, and User
Password.
The panel is visible for Administrator authentication level only.
Panel functional buttons:
Reboot Device
•
When it is pressed a confirmation window pops-up. If you confirm reboot, the information
screen will be shown (see
is done, you will need to log-in again;
Revert
•
When it is pressed all the changes in the panel will go back to the last saved values;
Save
•
When it is pressed all the changes in a panel are saved;
Restore All Except IP
•
This button is used to restore all device settings to factory defaults, except the IP address (in
this way, the connection to the device will be kept). When the button is pressed, a
confirmation window pops-up. If you confirm restore, the information screen will be shown
while the device restores. When restore is done, you will need to log-in again.
Page 28 of 60 | S e c t i o n DEVICE AND AMPLIFIER SETTINGS
User's Manual | ACOM eBox | Ethernet Remote Control Device
, Pos. (c)) contains the general settings of the eBox. You

Figure 5-2 eBox Reboot page

Figure 5-2 eBox Reboot page
Figure 5-2 eBox Reboot page
) while the device reboots. When reboot
October 2021