Acom eBox User Manual page 45

User's Manual | ACOM eBox | Ethernet Remote Control Device
The control and monitoring features of the ACOM 600S, 700S, or 1200S amplifier include the following
functions:
a) Power OFF and ON
Please, see
Figure 6-5 Operating of eBox with ACOM 700S
b) Ant
Please, see
Figure 6-5 Operating of eBox with ACOM 700S
Used only when a Remote Automatic Antenna Tuner and Switch ACOM 04AT is installed.
Displayed is the name and number of the actual selected antenna.
c) Forward Power
Please, see
Figure 6-5 Operating of eBox with ACOM 700S
Forward Power into the antenna: Digital value and bargraph, displayed in [W].
d) Temperature
Please, see
Figure 6-5 Operating of eBox with ACOM 700S
PA transistor temperature bar graph and readout. Entering the red zone is not allowed.
Displayed temperature in
e) Reflected Power
Please, see
Figure 6-5 Operating of eBox with ACOM 700S
Reflected Power from the antenna. Entering in red zone is not allowed.
Digital value and bargraph, displayed in [W].
f) Parameter 1 of 2
Please, see
Figure 6-5 Operating of eBox with ACOM 700S
The panel displays any one of the following parameters on your choice and their value:
•
Drive RF Power
•
Output Power
•
Forward Power
•
Reflected Power
•
Load (Antenna) VSWR
•
Power Gain
•
Bias Left
•
Bias Right
•
DC Current
•
DC Voltage
•
Temperature.
October 2021
o
C (degrees Celsius).
, Pos. (a).
, Pos. (b).
, Pos. (c).
, Pos. (d).
, Pos. (e).
, Pos. (f).
S e c t i o n OPERATION | Page 45 of 60