Table of Contents
Advertisement
Disassembly / Reassembly Operation
Reassembly
42
manual-sames-kremlin-582140110-EN.docx
The assembly is carried out in the reverse order of the disassembl y
sequence. Caution to the following instructions :
Stage 6 : Assembly of the piston floating seal (11) : first,
insert the seal (with a light coating of special pneumatic
grease) in the groove of the piston. Position the
rod/piston/seal assembly above the cylinder. Press on
the sides of the seal until the piston/rod assembly slides
inside the cylinder.
the nut (23) and the piston rod (32) are installed with a
light coating of glue (Eg . Loctite 222).
the piston rod (32) and the piston (24) are installed with
glue (Eg. Loctite 5772),
the seal (12) must be correctly mounted before
mounting the cover (8).
22/07/2021
Rexson-Dispense-pneumatic-motor-3000-instructions-
Advertisement
Table of Contents
