Table of Contents
Advertisement
Use of the product
To minimize ice build-up:
Lower the dew point of the compressed air. Use a refrigerated air dryer,
coalescing filter, or desiccant filter to lower the water vapor content of
the air.
Raise the compressed air temperature. Warmer air going in helps the
motor parts stay above 0°c / 32°F. Compressed air, especially at these
volumes, is warm when compressed. Keep the air warm or stay close to
the compressor to reduce ice formation.
Rexson-Dispense-pneumatic-motor-3000-instructions-manual-sames-kremlin-582140110-EN.docx
35
22/07/2021
Advertisement
Table of Contents
