Table of Contents
Advertisement
Handling
Grounding
Rexson-Dispense-pneumatic-motor-3000-instructions-manual-sames-kremlin-582140110-EN.docx
Coupled with a pneumatic motor, the fluid section will be
grounded via the earth cable of this motor.
This ground cable must be connected to a safe ground
Loosen the lock nut (A), remove the washer (B), insert the
terminal (C) with its ground wire (min. Section: 1.5 mm2)
between the washer (B) and the washer (D).
Retighten the lock nut. Connect the other end of the wire to a
real "earth" that complies with the regulations of the country
concerned.
Have the earth continuity checked by a qualified electrician.
If earth continuity is not assured, check terminal, wire, bracket,
and grounding point.
Never operate the pump without having solved this problem.
22/07/2021
29
Advertisement
Table of Contents
