SAMES KREMLIN 3000 User Manual page 40

Disassembly / Reassembly Operation
Disassembly of the motor
and of the fluid section
Disassembly of the
distributors and of the
sensors
40
manual-sames-kremlin-582140110-EN.docx
Adjust the air regulator to 0 psi (0 bar),

Shut off the air supply from the motor, then carry out the

pressure release and drain instructions,
Take off the axis lock (33),

Lift the closing ring (34),

Take off the two half bushes (35) and put aside the

closing ring,
Remove the fixing screws of the motor,

Put aside the motor.

Unscrew the hoisting ring (1) and remove the washer

(2),
Take off the cover (3) and disconnect the air hoses,

Unscrew the 4 screws (4), put aside the distributor (7)

and remove the base seal,
Unscrew the 2 screws (30) and put aside the distributor

(28),
Unscrew the 2 screws (18) and remove the U-bolt (17),

Unscrew the 4 screws (51) and put aside the sensors

(29),
Unscrew

sensors/distributor support (37),
Change the defective parts.

22/07/2021
the 2 screws (52) and put aside the
Rexson-Dispense-pneumatic-motor-3000-instructions-