Table of Contents
Advertisement
Safety instructions
2.2 Integrity of the material
Material recommendations
Pump
12
manual-sames-kremlin-582140110-EN.docx
Protectors are put in place for safe use of the equipment.
Exemples :
Engine hood.
Carters.
The manufacturer can not be held responsible in case of:
Bodily injury.
As well as breakdowns and / or damage to the
equipment
occultation or the total or partial withdrawal of the
protectors.
Recommendations for pumps.
It is essential to read the compatibilities of the motors and
pumps before coupling as well as the special safet y
instructions.
These instructions are on the pump instruction manuals.
The pneumatic motor is intended to be coupled to a
pump. Never modify the coupling system.
Keep hands clear of moving parts.
The parts constituting this movement must be kept clean.
Before starting up or using the motor pump, careful l y
read the DECOMPRESSION PROCEDURE.
Check that the decompression and purge air valves are
working properly.
It is forbidden to operate the pump without its protective
motor cover – risk of crushing
It is forbidden to disassemble the safety valve during the
operation of the pump – check that the air regulator and
pressure gauge are working once a month.
22/07/2021
resulting
from
Rexson-Dispense-pneumatic-motor-3000-instructions-
the
destruction,
the
Advertisement
Table of Contents
