SAMES KREMLIN 3000 User Manual page 14

Safety instructions
Paint phase pump and pressure gun
Rinsing the pump
Defusing the pump
Risk of fluid section heating during defusing
Mass cable
Trolley
14
manual-sames-kremlin-582140110-EN.docx
Mandatory wearing of PPE during this phase of painting

where the pump and the gun are under pressure.
Do not look at the gun nozzle when it is under pressure.

Rinse at a maximum of 1 bar at the pressure gauge of the

air equipment (variable pressure depending on the
length of the pipes).
Wearing PPE (glasses + gloves + safety shoes)

Do not look at the gun nozzle when it is under pressure

Rinse at a maximum of 1 bar at the pressure gauge of the

air equipment (variable pressure depending on the
length of the pipes).
PPE port mandatory.

Risk of overheating of the fluid section in case of

defusing.
It is mandatory to connect the pump to earth. The canes

are conductive
Concerning the work and displacement of the pump on trolley on a
flat floor it is forbidden to pull on the trolley and pump assembly via the
pipe.
22/07/2021 Rexson-Dispense-pneumatic-motor-3000-instructions-