Operation; Receiving The Dcf Radio Time Signal - Auriol HG06169A Operation And Safety Notes

˜ Operation
˜ Receiving the DCF radio time signal
Insert a 1 .5 V AA / LR6 battery with the correct polarity into the battery
compartment
7 ] [
The wall clock automatically starts to search for the DCF radio time signal . This
process takes about 3 to 12 minutes to complete .
Within 4 minutes, the hands will move to 12 o'clock . The radio signal reception
is initiated once all the hands have moved to the 12 o'clock position . After 3 to
10 minutes, the clock will receive the signal and set itself to the exact time .
The reception of the DCF radio time signal by the wall clock can also be started
manually .
Press and hold the REC button
receive the DCF radio time signal . This process takes a few minutes to complete .
Note: If the wall clock was not able to receive the DCF radio time signal because of
errors, e .g . due your location to being at too great a distance from the transmitter or
for other reasons, you can set the time manually . The manually set value is overwritten
as soon as reception of the DCF radio time signal is successful .
Note: For products intended for Latvia, the display stops at "01:00" .
on the back of the product .
at least 5 seconds . The wall clock attempts to
5 ] [
GB/IE/NI 13