Advertisement
2007 > 2.7L V6 GASOLINE >
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the front door trim panel. (Refer to the Body group-front door)
3. Remove the power window main switch mounting screws (3EA) (A) after disconnecting the switch connector
(12pin) from the switch.
4. Remove the switch from the front door trim panel.
5. Installation is the reverse of removal.
INSPECTION
1. Disconnect the 12P connector from the switch.
2. Check for continuity between the terminals in each switch position according to the table.
Advertisement
