Advertisement
2. Touch one tester probe to the glass antenna terminal (A) hear, and move the other tester probe along the antenna
wires to check that continuity exists.
GLASS ANTENNA REPAIR
To make an effective repair, the broken section must be no longer than one inch.
1. Lightly rub the area around the broken section (A) with fine steel wool, and then clean it with alcohol.
2. Carefully mask above and below the broken portion of the glass antenna wire (B) with cellophane tape (C).
3. Using a small brush, apply a heavy coat of silver conductive paint (A) extending about 1/8"on both sides of the
break. Allow 30 minutes to dry.
Thoroughly mix the paint before use.
Advertisement
