Advertisement
2007 > 2.7L V6 GASOLINE >
INSPECTION
TAPE HEAD AND CAPSTAN CLEANING
1. To obtain optimum performance, clean the head, and capstan as often as necessary, depending on frequency of
use and tape cleanness.
2. To clean the tape head and capstan, use a cotton swab dipped in ordinary rubbing alcohol. Wipe the head and
capstan.
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the center facia panel, console lower cover, center air vent, switches, tray and heater control panel (A).
(Refer to the Body group-Crash pad)
3. Remove the mounting 4 screws then remove the audio unit (A).
4. Installation is the reverse of removal.
VIDEO JACK (DVD ONLY)
1. Disconnect the negative (-) battery terminal.
Advertisement
