Advertisement
7. Apply a light coat of glass primer to the outside of the fasteners.
a. Never touch the primed surface with your hand.
If you do, the adhesive may not bond to the glass Properly, causing a leak after the windshield glass is
installed.
b. Do not apply body primer to the glass.
c. Keep water, dust, and abrasive materials away from the primer.
8. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking
gun, and run a bead of adhesive (A) around the edge of the windshield (B) between the fastener and molding as
shown. Apply the adhesive within 30 minutes after applying the glass primer.
Make a slightly thicker bead at each corner.
Advertisement
