Advertisement
4. Installation is the reverse of removal.
SLIDE MOTOR
1. Disconnect the negative (-) battery terminal.
2. Remove the seat cushion (Refer to Body group - front seat).
3. Remove the slide motor (A) after removing the mounting bolts (2EA) and connector.
4. Installation is the reverse of removal.
RECLINING MOTOR
1. Disconnect the negative (-) battery terminal.
2. Remove the seat back (Refer to Body group - front seat).
3. Remove the seat shaft fixing clip (A) and seat shaft (B).
4. Remove the relining motor (A) after removing the mounting nut (1EA) and connector.
Advertisement
