Advertisement
2007 > 2.7L V6 GASOLINE >
REPLACEMENT
1. Disconnect the negative (-) battery terminal..
2. Remove the rear trim panel (Refer to the Body group - interior trim)
3. Remove the connectors and mounting bolts (2EA) from the power sliding door unit(A). And then remove the power
sliding door control module (B).
TORQUE 0.25-0.35N.m(0.025-0.035Kg.m)
4. Installation is the reverse of removal.
a. A learn cycle must be performed whenever the power is removed.
b. Check the normal operation whenever a power sliding door component is removed or replaced. If the
chime sound is heard, check the DTC, wiring harness and cable connections.
Advertisement
