Table of Contents
Advertisement
1
Abbreviations
CC: Compact Closure
FIC: Field Installable Connector
2
Tools
• Small side cutter or Cable Tie Gun (to cut excess cable tie)
• Fiber splice equipment and fiber cleaning tools
3
Warnings and Cautions
• Follow the installation instruction steps to ensure the performance of the closure. It is necessary to take
precautions and keep the working space clean to protect the closure sealing materials and splices.
• Exposure to laser radiation can seriously damage the retina of the eye. Do not look into the ends of any optical
fiber. Do not assume the laser power is turned off or that the fiber is disconnected at the other end. Looking into
the ends of any optical fiber is entirely at your own risk. A protective cap or hood MUST be immediately placed
over any radiating adapter or optical fiber connector to avoid the potential of dangerous amounts of radiation
exposure. This practice also prevents dirt particles from entering the connector and adapter.
• Fiber optic cables may be damaged if bent or curved to a radius that is less than the recommended minimum bend
radius. Always observe the recommended bend radius limit when installing fiber optic cables, subunits and patch
cords.
page 3 / 13
© 2021 CommScope, Inc. All Rights Reserved
Advertisement
Table of Contents
