Solid State Logic Network I/O SB 8.8 Installation Notes page 8

7. Once finished a dialogue box will inform you that the update is completed, click ​ O K​ .
8. The unit needs a complete power cycle to be fully functional, power cycle the device by
removing and reapplying power.
Installing SSL Network I/O Controller
Once the hardware elements of the system have been upgraded it is important to install the latest
version of the SSL Network I/O controller as the older Network I/O controller software is not
compatible with updated hardware. V.1.2.1.27818 is required and will be provided in the software
update package.
1. Locate the new Network I/O ​ . exe​ file as shown below and double click.
2. A dialogue box will appear asking if you wish to run the file click the ​ R un​ button.
Your firmware updates are now complete!
Network I/O SB V2.1 Installation Notes
Page 7