Tele System STEALTH TS6807 User Manual page 33

3.6 System Menu
3.6.1 System Information
Lists information to the receiver system, particularly the software version in use.
3.6.2 Factory Setting (reset)
The reset function of the receiver factory original configuration is commonly also called Reset. To reset, move the cursor
to Factory Settings and press the OK button, then confirm.
WARNING
By performing this operation, you will lose all user customizations and all loaded channels. It will still retain the last
software version installed.
3.6.3 Timer List
See section 2.7
3.6.4 OSD Settings
The following settings are available:
OSD Timeout : duration of the channel information banner
1.
OSD Transparency : Transparency of the channel information banner
2.
Switching mode : Choice between black screen and freeze while you switch channels
3.
Subtitles Display : Setting to keep active the subtitles
4.
3.6.5 USB Update
The receiver's software is upgradeable via USB port via this menu, upon insertion of a USB stick containing the appropriate
software image that the manufacturer will arrange at its discretion if necessary.
WARNING
During a software update, do not interact with the receiver nor pull power: risk of irreversible receiver block!
3.6.6 Automatic Update setting
Function suitable for automatic update configuration of the channel list and the software during standby mode. The
receiver is factory-set to do the upgrade at 4:30 am (4:00 for the software).
Both can be disabled, by acting on parameter In standby mode (On / Off), or moved, by inserting with the numeric keys 0 to
9 on the remote control to a new time (in the format HH: MM) in correspondence with the Time parameter.
3.6.7 Auto Standby
The receiver is equipped with said energy-saving auto-off: past three hours function in operating mode without any
command from the user, the receiver will go to standby automatically. This function is factory preset and is possibly
deactivated or changed by the menu.
3.7 Menu Multimedia
3.7.1 Music - Pictures - Movies
Menu dedicated to the reading of personal media files (refer to par.2.6.2) From a mass memory connected to the USB port
of the same receiver.
3.7.2 Device Information
Information relating to mass storage connected to the USB port
3.7.3 Storage Format
Utility of the USB storage device formatting. Select the partition and confirm (select Format and press OK)
WARNINGS
• Formatting will delete all files in the memory device.
TS6807 STEALTH
11