Tele System STEALTH TS6807 User Manual page 32

TELE System
3.4 AV Setting Menu
The AV Setup menu has the following video configurations, to be adjusted in line with the capabilities of the monitor / TV
connected to the receiver:
3.4.1 TV System
Select the TV standard (PAL - NTSC).
3.4.2 Resolution
Setting the video output resolution audio to HDMI digital video.
WARNING
If the screen connected via HDMI are having trouble viewing, connect the receiver via SCART to set an appropriate
resolution value.
3.4.3 Aspect Mode:
Screen Format / TV connected to the receiver, between 16: 9 or 4: 3, and the related image presentation mode having a
different format from the screen:
16: 9 Letter Box:
a.
right and left sides to fill the screen without distorting the original image.
16: 9 Pan & Scan
b.
the upper and lower portions.
4: 3 Letter Box
c.
and below to fill the screen without distorting the original image.
4: 3 Pan & Scan
d.
side portions.
3.4.4 Video Effects
Default settings for picture adjustment.
3.4.5 Audio Output
Encoding HDMI digital audio output between Stereo (LPCM Out) and original audio passage as from source (Strength SPDIF
Out) or original audio passage connected with the TV control (BS Out, the digital audio is sent in Stereo if the TV does not
It supports the original format).
3.4.6 Audio description
Enable / disable the function description of the scenes (via compensation Volume AD) you can set the volume level of
description than the volume of the audio track).
3.4.7 HDMI CEC
This item allows you to enable / disable the CEC function of the receiver. If the TV connected via HDMI to the receiver is
compatible with the CEC protocol, and its function is also active on the TV, then it is possible to use the TV remote control
to control some basic functions of the receiver, such as power on / off, channel change and adjustment audio volume.
WARNING
Some TVs implement a custom protocol CEC and / or have limited functionality CEC. CEC can not be guaranteed
compatibility with all TVs.
3.5 Menu Local Time Setting
The controls described below are offered depending on the value assigned to GMT Usage:
By Region
1. : Auto Time Synchronization (Recommended) in line with the information provided by terrestrial digital
channels.
User Define
2. : You will have to define the Daylight Savings Time and Time Zone, that is, the time deviation from the
global standard of Greenwich (Greenwich Mean Time - GMT). For Italy, the difference is +1 hour (GMT + 1).
Off
3. : Time manual adjustment. The user must define the date and time.
10
when the video source is transmitted in 4: 3, the receiver will apply two black bars on the
: The 4: 3 image will be adjusted in proportion to the width of the screen, while cutting off
: When the video source is transmitted in 16: 9, the receiver will apply two black bars above
: The 16: 9 images are proportionally adapted to the height of the screen, while cutting off the