Tele System STEALTH TS6807 User Manual page 29

Video Menu
Press OK at the audio-video file to start it. Press the OK button again to switch the preview mode to the full-screen display.
While reading, use the buttons 2d (PLAY / PAUSE) to pause / resume watching, 5/6 (REW / FWD) to rewind / fast forward
and 3 (STOP) to end playback.
2.7 Programming Timer
From the viewing mode by pressing the TIMER button to display the menu for the manual programming of viewing timer
for one or more non-contemporary events.
To add a timer, press the blue button (Enter), and then define the following parameters:
Timer Mode : Repetition frequency of the timer.
1.
Timer Service : Timer modes.
2.
Wakeup Channel : Name of the channel affected by the timer.
3.
Wakeup date : Start date (in DD / MM / YYYY format).
4.
On time : Start time (in hh: mm).
5.
End Time : Term time (in hh: mm).
6.
Name : Enter a name to a timer (press OK to make the virtual keyboard appear).
7.
Then save the data by pressing the OK button on the remote (or EXIT to abort the insertion of the timer).
Later, to edit or delete booked timer, select it from the list and press the OK button (to edit) or Red (Delete).
2.8 LCN
The channel numbering logic function (Logical Channel Numberig - LCN) causes the channels to be sorted automatically
according to the position requested by the broadcasters of the same channels. In case two or more channels require the
same number of position, the receiver will autonomously automatic allocation of the position in the list of channels in
conflict, which can be varied, however, at a later time by the user via the Channel Manager menu (par.Menu Gestione
Canali )
TS6807 STEALTH
7