Tele System STEALTH TS6807 User Manual page 24

TELE System
1.2 Product description and connections
1. TV SCART Analog Audio-Video Output SCART standard resolution for connection to a screen / TV, an alternative to the
HDMI output.
2. USB USB connectors for reading personal multimedia content (video, images, music).
WARNINGS
Compatible with USB storage devices formatted with the FAT32 file system.
•
• compatibility can not be guaranteed with all USB memory devices in the market.
• It is advisable to use USB Hard Disk with external power supply, because the receiver can not guarantee the
correct power supply via the USB port. This arrangement will avoid a possible damage of the memory device.
3. IR connector for infrared sensor, including the LED status indicator (green = run - red = standby).
4. DC IN Power supply input for the power supply connection in each room, which in turn is to be connected to an outlet
of 230V ~ 50Hz current.
5. LAN Ethernet input for broadband IP connection
6. HDMI for high definition, dedicated to the connection of a screen equipped with an HDMI interface.
NOTE
If the display is connected to the receiver via HDMI interface presents difficulty in viewing, connect the receiver via
SCART and adjust video resolution from the Image menu of the receiver itself, respecting the characteristics of the
connected screen.
7. RF IN Ant signal.
2