Battery; Maintenance - PrimAster PMAMT 40 Instructions Manual

BATTERY

Recharge only with the charger specified by the manuf-
acturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Vapours may leak out in case of unauthorised use or
when using a damaged accumulator. Bring fresh air and
seek medical advice if experiencing difficulties. Vapours
may irritate the respiratory system.

MAINTENANCE

DANGER!
Take the replaceable battery from the appliance
before any extension, cleaning and servicing
works. Wait until all rotating parts have stopped and the
appliance has cooled down.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body! Never clean
the machine and its components with solvents, flammable
or toxic liquids. Us only a damp cloth making.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of the
user. The manufacturer will not be liable for any such damage.
Please contact our service department if you need acces-
sories or spare parts.
When ordering spare parts, provide the following information:
• Device type
• Device article number:
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may only
be performed by qualified authorised staff.
WARNING
Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumulators.
Never open or damage the accumulator or let it fall on the
ground.
Never charge the battery in an environment with acids
and easily flammable materials.
Protect the battery against heat and fire.
Battery to be used at the ambient temperatures between
10°C and +40°C only.
Never put the battery on heaters and do not expose it to
strong sunlight for a long time.
After being subject to heavy load, let the battery cool
down first.
Short circuit - do not bridge the accumulator contacts with
metal parts.
The accumulator must be packaged (plastic bag, box) or
accumulator contacts must be sealed up for accumulator
disposal, transport or storage.
Keep your chain saw professionally maintained and safe.
Sharpening the chain safely is a skilled task. Therefore,
the manufacturer strongly recommends that a worn or
dull chain is replaced with a new one, available at your
service agent. The part number is available in the product
specification table in this manual.
Follow instructions for lubricating and chain tension
checking and adjustment.
Lubricate at intervals of 50 hours via the lubricating
nipple.
Use lithium-based lubricating grease for high tempera-
tures and pressure values to lubricate your machine.
After each use, clean the machine with a soft dry cloth.
Remove any chips, dirt and debris in the battery bay.
Check all nuts, bolts, and screws at frequent intervals
for security to ensure the machine is in safe working
condition. Any part that is damaged should be properly
repaired or replaced by an service station.
Is the device or power cord from the battery charger
immediately damages the power plug or battery pull.
Repairs may only be carried out by an authorized
Specialist company. By improper Repairs can pose
significant risks to the user arise.
GB ENGLISH
47