General Power Tool Safety Warnings; Work Area Safety - PrimAster PMAMT 40 Instructions Manual

GB ENGLISH
When using the machine, pay attention to the working
posture and change the working positions. Also take
regular breaks.
Avoid using the multifunction device an ambient tempe-
rature of less than 10 ° C.
Children should be supervised to ensure that they do not
play with the device. Cleaning and maintenance must not
be carried out by children.
Allow the engine to cool down for transport and secure
the machine from slipping before transporting it with a
vehicle. This ensures that oil leakage (pruners), damage
or injuries is prevented. The device is always transported
with the knife / sword protection attached.
It is recommended to attend a course on the use,
maintenance of the device and a first aid course. If you
are not going to use the device for a long period of time,
you should familiarize yourself with the device before
starting.
Check the work area before using the appliance.
Remove any hard objects such as stones, shards of glass,
wires, etc. that could be thrown off, knocked back or that
could otherwise cause injury or damage during appliance
operation.
Never use the appliance when the proper equipment
is not fitted.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
Check all screw and plug-in connections and protective
equipment if firm and tightened properly and whether
all moving parts are running smooth whenever the
appliance is to be put into operation.
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in conflict
with the designation and it is prohibited to attach any
protective equipment of other manufacturers.
If the appliance starts abnormally vibrating, switch the
engine off and search for the cause immediately. Gene-
rally, vibrations are a warning against operating failure.
When being blocked, turn the appliance immediately off
and remove the jammed item.
The appliance must be stored in a dry place and protec-
ted from frost.
Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
38
instructions to operate the power tool.
CAUTION
Damage to health arising from vibrations to hand
and arms if the device is used for a long time or if the
device is not guided and evaluated properly.
Vibration damping systems are no guaranteed protection
against white finger disease or carpal tunnel syndrome.
Therefore, it is necessary to carefully check the state of
your fingers and wrist if you have regularly used the appli-
ance for a long time. If any symptom of the diseases above
appears, seek medical advice immediately. To reduce the
white finger disease risk, keep your hands warm and take
regular breaks during your work.
CAUTION
Hearing damage
A longer stay in the immediate vicinity of the running
unit may cause hearing damage. Wear ear protectors!
When working with the device, a certain level of noise
cannot be avoided. Noisy work should be scheduled for
hours, during which it is allowed by statute or other local
regulations. Adhere to any applicable rest times and limit
your working time to the necessary minimum time. For
your personal protection and the protection of people
nearby, suitable hearing protection must be worn.
Please do also consider any local regulations concerning
noise protection!
DANGER!
Warning: This power tool generates an electromagnetic
field during operation. Under certain circumstances, this
field may affect active or passive medical implants. To
reduce the risk of serious or fatal injury, we recommend
that individuals with medical implants consult your physi-
cian and the manufacturer of the medical implant before
operating the machine.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.