Restore To Factory Setting; Home Automation Clusters For Z103A - netvox ZigBee Z103A User Manual

5-3. Restore to Factory Setting

To restore Z103A to factory setting, please follow the steps:
Step1. Remove Z103A from the USB port to power it off.
Step2. Press and hold the Permit-Join Key.
Step3. Do not release the key and plug Z103A into the USB port to complete the restore.

6. Home Automation Clusters for Z103A

A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A
simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table
lists the clusters which are supported by Z103A.
1.End Point(s)：0x0A
2.Device ID：Combined Interface（0x0007）
3.Cluster ID
Server side
Basic(0x0000)
Identify(0x0003)
Commissioning(0x0015)
Diagnostics(0x0B05)
This lists the attributes of the basic information.
Identifier
0x0000
0x0001
ApplicationVersion
0x0002
0x0003
0x0004
ManufacturerName
Name Type
Unsigned
ZCLVersion
8-bit integer
Unsigned
8-bit integer
Unsigned
StackVersion
8-bit integer
Unsigned
HWVersion
8-bit integer
Character
Mandatory
Optional
Range Access
0x00 – Read only
0xff
0x00 – Read only
0xff
0x00 – Read only
0xff
0x00 – Read only
0xff
0 – 32 Read only
5
Client side
Default Mandatory
/ Optional
0x03 M
0x28 O
0x33 O
0x0B O
netvox O