Viewing And Storing Images On A Computer - Casio GZE-1 User Manual

Viewing and Storing Images on a Computer

You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
Never use your computer to modify, delete, move, or rename any image files
that are in the camera's built-in memory or on its memory card.
Doing so can cause problems with the camera's image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
NOTE
• You also can use your computer's card slot (if it has one) or a commercially
available card reader to access image files directly from the camera's memory
card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1.
Hold down the [POWER] button for about two seconds to turn off
power, and then remove the cover (page 12).
2.
Next, use the micro USB cable
that comes with the camera to
connect it to your computer's
USB port.
• For details about connecting to
the camera and precautions
when connecting, see page 16.
3.
Press the [POWER] button to turn on the camera.
When you turn on the camera, check to make sure that the color of its [POWER]
lamp changes from red to green or amber (page 17).
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
(included with camera)
51
[USB] port
USB
Micro USB cable
Using the Camera with a Computer