Table of Contents
Advertisement
• Check the contact surfaces of the cover gaskets for dirt, sand, and any other
foreign matter. Clean contact surfaces by wiping them with a soft, clean, dry cloth.
Note that a single strand of hair or a single grain of sand can allow water to get into
the camera.
• Check the cover splashproofing gaskets are free of cracks, scratches, and other
damage.
• Close the cover securely into place.
• This product will sink if placed in water.
• The splashproofing of this camera protects it against salt water and fresh water
only. Protection is not provided against hot spring water.
• Do not leave the camera for long periods in a location subjected to very high or
very low (below freezing) temperatures. In particular, avoid leaving the camera in
areas exposed to strong direct sunlight, in a motor vehicle on a hot day, etc. Any of
these conditions can result in a deterioration of splashproofing.
• Wireless communication with wireless LAN or Bluetooth wireless technology is not
supported under water.
. Precautions during Underwater Use
• The camera is designed for use at depths no greater than 50.0 meters (164.04
feet) and at water temperatures within the range of 0
• Do not leave the camera submerged for more than 30 minutes.
• Never open the cover while the camera is submerged.
• Take care that you do not drop the camera into water or allow it to strike the
surface of the water. Doing so can cause leaking.
. Precautions after Underwater Use
• Before opening the cover, use a clean, dry, soft cloth to wipe the camera free of all
moisture and dirt.
• Water droplets can get onto the inside surface of the cover while it is open. Be sure
to wipe all moisture from the inside surface of the cover before closing it.
Remaining water droplets can get into the camera components and cause
malfunction.
to 40
°C
67
(32
F to 104
F).
°C
°
°
Appendix
Advertisement
Table of Contents
