Remote Screen Indicators - Midea MAP User Manual

Remote Screen Indicators

Information is displayed when the remote control is powered on.
The Comfort SENSE function enables the
remote control to measure the temperature
at its current location and send this signal to
the air conditioner every 3 minutes interval.
When using AUTO, COOL or HEAT modes,
measuring ambient temperature from the
remote control(instead of from the indoor
unit itself) will enable the air conditioner to
optimize the temperature around you and
ensure maximum comfort.
Transmission Indicator
Lights up when remote
sends signal to indoor
unit.
TIMER ON display
TIMER OFF display
FAN SPEED display
Displays selected
fan speed:
LOW
MED
HIGH
AUTO
This fan speed can not be
adjusted in AUTO or DRY
mode.
Page 24
Horizontal louver
auto swing display
(NOT APPLICABLE)
Fresh feature display (Not applicable)
Sleep mode display
Comfort sense feature display
Wireless control feature display
Low battery detection display
(If flashes)
MODE display
Displays the current mode,
including:
LOCK display
Displays when LOCK
feature is activated.
Temperature/Timer/
Fan speed display
Displays the set temperature
by default, or fan speed or
timer setting when using
TIMER ON/OFF functions.
Temperature range:
16-30°C / 60-86°F
Timer setting range:
0-24 hours
This display is blank when
operating in FAN mode.
User Manual