Assembling The Sliding Window Adapter; Hung Window Installation - Midea MAP User Manual

(Front + Rear)
Foam seal B
(Adhesive type-shorter)
Window
Window
slider B
slider A
(if required)
Page 16
Sliding
3: Assembling the Sliding Window Adapter (Only needed
Window
for Sliding Window applications).
Adapter
Align both halves of the sliding window adapter and connect
them. Then, attach the air divider to the newly formed window
adapter on the outdoor side. The fully assembled adapter
should look like the image at the left.
Air
Divider
Type 1: Hung window installation
1. Cut the adhesive foam seal A and B strips to the proper lengths,
and attach them to the window sash and frame as shown.
Foam
seal A
(Adhesive
type)
2. Insert the window slider assembly into the window opening.
If the hose opening is covered by the window frame, rotate the
panel so the thicker side faces the window frame.
Attach the Window Kit Brace to the back of the hose panel –
trim the brace if necessary.
Window
Kit Brace
User Manual