Window Installation Kit; Preparing The Adjustable Window Slider - Midea MAP User Manual

Window Installation Kit

Air Exhaust
Adapter
Exhaust
Hose
Before assembly
Window
Sliders
After assembly
Bolt
1+2:
Bolt
1+2+3:
Bolt
Bolt
1+2+3+4:
Bolt
Bolt
1+2+3+4+5:
Bolt
1+2+3:
Bolt
1+2+3+4:
NOTICE
Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of
the following two installation methods.
User Manual
Bolt
Bolt
Bolt Bolt
Bolt
Bolt Bolt
1: For Hung Window types only
Insert the Air Exhaust Adapter into the
exhaust of the hose (the circle opening).
Rotate the adapter clockwise until the locking
tabs click and no longer rotates.
Skip this step if installing into a horizontal
sliding window.

2: Preparing the adjustable window slider

1. Depending on the size of your window,
adjust the size of the window slider.
2. If the length of the window requires two
or more window sliders, use the bolt to
fasten the window sliders once they are
adjusted to the proper length.
Windows Type
Window
slider A
Hung Window
3. Paste the insulator on the inside of the
Window sliders.
inside
insulator
Window
slider A
Sliding Window
Insulator
(Use one or
two piece)
Page 15