Tools Needed; Accessories; Window Installation Kit - Midea MP120QWBA3RC1 Operator's Manual

Tools Needed

-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors;
-Saw (On some models, to shorten window adaptor for narrow windows)

Accessories

NOTE: Slight variations in design may occur.
Shape
Name of Accessories
Unit Adaptor
Exhaust Hose
Window Slider Adaptor
Window Slider A
Window Slider B
Window Slider C
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)

Window Installation Kit

Exhaust hose
Unit adaptor Window slider
adaptor
Type window installation
Hook
Hole Seat
Lower groove
adaptor
 
Page 8
Qty.
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
4 pc
2 pc
2 pc
Exhaust hose
assembly
Make sure the adaptor
is inserted into the lower
groove of the air outlet.
Shape
Name of Accessories
Security Bracket and 2 Screws
Drain Hose
Power Cord Buckle
Bolt
Remote Controller and Battery
Step One: Preparing the Exhaust Hose assembly
Press the exhaust hose
into the window slider adaptor
and unit adaptor, clamp automatically by
elastic buckles of the adaptors.
Step Two: Install the Exhaust hose assembly to
the unit
Insert unit adaptor of the Exhaust hose assembly
into the lower groove of the air outlet of the unit
while the hook of the adaptor is aligned with the
hole seat of the air outlet and slide down the
Exhaust hose assembly along the arrow direction
for installation.
Qty.
1 set
1 pc
1 pc
2 pc
1 set