Technical Specifications; General Safety Precautions And Accident Prevention Measures; Risk Assessment; Clothing - Hamach 7000 User Manual

4.3 Technical specifications

Dimensions (H x D x W)
Weight
Compressed air connector
Baling chamber (H x D x W)
Air consumption
Rated air pressure
Operating pressure
Baling time
Compaction force

5. General safety precautions and accident prevention measures

Please read the following instructions carefully. Failure to follow these instructions may result in injury
to the operators, other persons or animals or damage to property. E.M.M. International rejects all
claims for compensation in respect of damage resulting from failure to observe the safety precautions
and accident prevention measures set out below. Similarly, E.M.M. International BV rejects all claims
for compensation resulting from improper use of the press and/or modifications to the press made
without the approval of the manufacturer.

5.1 Risk assessment

A risk assessment relating to the installation and operation of the press is available on request from
EMM International.

5.2 Clothing

The operator of the press must wear protective gloves in order to prevent their hands from
•
coming into contact with paint-covered masking paper or masking film while
loading/unloading.
The operator must wear suitable protective clothing while loading/unloading.
•

5.3 Environment and disposal

• The baled masking paper or masking film must be transferred for recycling in strict
accordance with local regulations.
• At the end of its service life, the press must be disposed of in accordance with the regulations
prevailing in the country in which it was installed.

5.4 Instructions for safe use

The press was developed solely for use as a baling press for masking paper, lightweight
•
cardboard and masking film.
Make sure that either paper or plastic film is being baled. Avoid mixing the two, because
•
problems may otherwise arise during disposal, since they are two different waste products.
Wear suitable protective clothing when operating the press.
•
1510 x 660 x 680 mm
102 kg
1/4" G
400 x 400 x 600 mm
20 l/stroke
max. 10 bar
6 - 8 bar
7 sec./6 bar
650 kg at 6 bar
19