Operating Manual English; Introduction; Important Information - Hamach 7000 User Manual

Hamach Paper and Plastic Bale Press
Operating Manual

1. Introduction

Congratulations on your purchase of a Hamach paper and plastic bale press. Thank you for placing
your trust in us. This operating manual contains all information needed to use, set up and maintain
the Hamach paper and plastic bale press.The Hamach paper and plastic bale press is permitted to be
used solely for compacting masking paper, lightweight cardboard and masking film. The Hamach
paper and plastic bale press substantially reduces the volume of your waste.
The Hamach paper and plastic bale press is of robust and high quality construction. If looked after
properly, it will give many years of trouble-free service. In order to ensure that the press operates
smoothly, it is important to read this instruction manual carefully and keep it near the machine at all
times.
If you have any questions about this operating manual, please contact your supplier.
EMM accepts no liability and offers no guarantee whatsoever if this operating manual is not duly
observed.

2. Important information

Instructions regarding packaging:
The Hamach paper and plastic press is packed for transport on a pallet. The packaging must be
removed and disposed of in accordance with local waste disposal regulations. The press can easily be
removed from the pallet and set up using lifting equipment.
Press dimensions: (H x D x W): 1510 x 660 x 680 mm – Weight 102 kg
CAUTION!
Safety shoes must be worn during transport and installation. Set up the press on a flat, level surface.
CAUTION!
Please observe the following when the machine is in operation:
• No smoking
No naked flames
•
Avoid creating sparks or flying sparks, including from neighbouring workstations
•
• Ensure that either paper or plastic film is being baled. Avoid mixing the two, because
problems may otherwise arise during disposal, since they are two different waste products.
• Ensure that any paint covering the paper or plastic film to be baled has dried. This will prevent
the interior of the press from becoming unduly contaminated.
Carry out regular checks to ensure that the press is working properly
•
• In the event of a defect or breakdown, immediately disconnect the press from the
compressed air supply and inform your supplier or the manufacturer.
• Ensure that the workplace and surrounding area are kept clean
Wear protective clothing (personal protective equipment)
•
English
15