Description; Function - Hamach 7000 User Manual

Bale press
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
Guarantee claims are void if this operating manual is not observed and in the following cases:
If the press is not used or operated correctly by the operator(s).
If damage results from improper care and maintenance.
If the press suffers damage as a result of repairs or modifications made without the approval
of E.M.M. or caused by a non-original replacement part.
If the owner has not followed the instructions set out in this manual.

4. Description

The press was developed in line with existing standards and guidelines and is used to bale masking
papers, lightweight cardboard and masking film. The press is fitted with a self-lubricating pneumatic
compacting ram which does not require subsequent lubrication. The press must be connected to a
compressed air supply with a pressure of at least 10 bar. However, this is reduced to a maximum
pressure of 8 bar by means of the pressure regulator fitted to the machine.
The press is supplied with two canisters of baling twine that must be mounted on the top of the press
(one on the left and one on the right).
The material to be baled is loaded via the upper hatch fitted with a hinged lid that opens upwards.The
lower door, which opens to the side, is used to remove the bale of material.
CAUTION!
When the press is in operation, both openings are kept closed by means of a safety system. Never
attempt to circumvent this safety system through external force or by making modifications.
Similarly, the upper loading hatch is automatically locked by the safety system if the compressed air is
disconnected. This is to prevent the operator from reaching into the hatch (in the absence of
compressed air, the vertical ram descends automatically). Failure to follow these instructions can lead
to severe injury or even death.
CAUTION!
Read Sections 6 and 7 carefully. These sections refer to the safe handling of this press.

4.1 Function

Working parts of the press:
Compacting ram with piston rod and compacting plate
Pressure regulator
Canisters for baling twine
Baling twine
Safety system
ON button
Upper loading hatch
Lower door for removal
Compressed air hoses
17

Advertisement

Table of Contents
loading

Related Products for Hamach 7000

Table of Contents