Ergotron StyleView SV31 User Manual page 5

Set-up
4
a
Placement of CPU's in Secure Storage Area:
USFF (Ultra Small Form Factor)
Do Not connect or use fan with USFF (Ultra Small Form Factor) CPU's.
b
Place AC Power Adaptors in compartment.
5
Set up Ready On Feature -
button that when pushed will wake up your computer from
hibernate or power off . Setting your equipment to hibernate
as soon as possible is recommended to save battery charge.
Your computer must be hooked up via ethernet connection
to the cart's Ready On Ethernet Port and the batteries must be
installed into the Ready On battery pack.
Initial Set-up:
1. Turn Computer on.
2. Adjust Bios, Windows Power Management, and NIC settings to enable Wake on LAN.
888-24-090-G-00 rev. D • 11/10
The ready on feature is a
Route computer cables down opening in
enclosure (left or right side.)
Thin Client
Center CPU in storage area.
Batteries are factory installed.
EN
2x
AA
Lithium
5/12