Volvo A2DIY-VOL Quick Start Manual page 5

Fig. 12
USB charging port
Push USB head (See Fig. 13) until it snaps in place and flush with
3.
mounting surface (See Fig. 14)
Fig. 13
USB head
Fig. 14
Flush mounted to dash
Tuck and secure any extra wire from moving parts and test operation
4.
(See Enabling the AUX section below)
USB with Bracket Mount
B.
Locate a flat surface at location of choice within 3.2 ft. of radio and
1.
mount USB support bracket (See Fig. 15) to surface using
adhesive/tape or screws.
USB mounting bracket
Insert the 6 ft. USB male terminal through bracket hole (See Fig. 16)
2.
and connect to Module USB port (See Fig. 12)
Push USB head until it snaps in place and flush (See Fig. 17)
3.
Tuck and secure any extra wire away from moving parts and test operation (
Bluetooth Pairing and Connection
(No drilling)
Fig. 15
Fig. 16
Fig. 17
See