Installation - Volvo A2DIY-VOL Quick Start Manual

Introduction:
Many Volvo owners adamant about keeping their cars as stock possible, will be
thrilled with the A2DIY-VOL kit which adds modern Bluetooth features without
changing the look and feel of dashboard components. Features Bluetooth
Hands-Free and music streaming from any Smartphone with A2DP and HFP
support. In addition to Bluetooth, a hardwired 3.5mm input jack is available for
users to connect and play non-Bluetooth devices such as Mp3 players, satellite
radio kit, iPods etc. A smart remote control for Apple and Android devices allows
users to track up/down, pause, increase/decrease device volume and more.
Optional USB charging port to keep devices charged while on the road.
Keep the radio and car you love while enjoying Bluetooth features only
available on newer cars. For more details, see Frequently Asked question at
the end of this guide.

Installation:

Although not critical, we recommend disconnecting battery.
Keep in mind, most Volvo radios are coded and will not operate
without code. Radio code must be available for radio to operate
upon reconnection
Remove radio by pressing both spring-loaded release tabs as seen in
1.
Fig. 1
Place finger inside release ring and pull outward as seen in Fig. 2
2.
Fig. 1
Fig. 2
Connect adapter harness 8-pin plug (See Fig. 3) to radio "CD" port
3.
(See. Fig. 4).
Factory CD Changer (if present) must be disconnected.
Fig. 3
Fig. 4
Radio's 8-pin Changer port