Bunn ITCB Operating & Service Manual page 71

TROUBLESHOOTING (cont.)
PROBLEM
Dilution cycle will not start
PROBABLE CAUSE
1. Dilution valve
2. Recipe settings
3. Strainer
Page 71
REMEDY
Test the dilution valve. Refer to
the test outputs procedures on
page 56.
Check to make sure the current
recipe has a dilution volume set.
Coffee recipes will not have dilu-
tion.
Direction of flow arrow must be
pointing towards the brewer. Re-
move the strainer and check for
obstructions. Clear or replace.
36748 080904