Dilute Delay; Set Pulse Brew - Bunn ITCB Operating & Service Manual

PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
Tea recipes: DILUTE DELAY
Range: OFF to 10 minutes for both batch sizes
This function allows the operator to adjust the timing
for the start of the dilution water. The OFF setting will
begin dilution flow immediately after the brew button
is pressed (simultaneously with the brew water). If a
time is set for Dilution Delay, the dilution water dispense
will be delayed for that set time after the brew button
is pressed and the brew started.
NOTE: If the brewer is already on the DILUTE DELY
screen, skip steps 1 through 8, and proceed directly
to step 9.
1. Press and hold the right hidden button until the dis-
play reads SET LANGUAGE. Press the right hidden
button until the display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now read
TEA 1, along with MODIFY SHOW NEXT.
3. Press and release NEXT to advance to the desired
tea recipe to be modified.
4. Press and release MODIFY. The display should read
BREW OZ:
5. Press and release DONE. The display should read
2 BATCHES DONE?
6. Press and release YES. The display should now
read DILUTE OZ:
7. Press and release DONE. The display should read
2 BATCHES DONE?
8. Press and release YES. The display should now read
DILUTE DELY: and a batch light will be blinking.
Press and release the batch size to be modified.
9. Using (-) and (+), set the time delay for the dilution
water for that particular batch size.
10. When finished, press the other batch size and repeat
step # 9.
11. When finished setting both batch sizes, press and
release DONE. The display should read 2 BATCHES
DONE?
12. If both batch sizes are not correct, press and release
NO to return to the DILUTE DELY setup screen and
repeat steps 9, 10 and 11.
13. If both batch sizes are correct, press YES. The
display should now show the Brew Oz, Dilution Oz,
and Dilution Delay setting for the batch size just
programmed. After a 5 second delay, the display
will read SET PULSE BREW. To exit to the MAIN
SCREEN, press and release the ON/OFF button.
REVIEW RECIPES
NO
BREW BREW
A
PRESSING NO WILL
ADVANCE TO NEXT
FUNCTION SCREEN
ADVANCE TO THE
RECIPE TO BE
MODIFIED
SET BOTH
BATCH SIZES
IF NO, RETURN TO
DILUTE DELY
Page 28
YES
BREW
B C
TEA 1
MODIFY SHOW NEXT
BREW BREW
A B
(RECIPE NAME)
MODIFY SHOW NEXT
BREW BREW
A B
SET BREW OZ XX.X
AND SET DILUTE OZ XX.X
WHEN BOTH BATCHES ARE DONE,
PRESS YES TO ADVANCE TO

DILUTE DELAY

DILUTE DELY
(-) DONE
BREW BREW
A B
2 BATCHES DONE?
NO YES
BREW BREW
A B

SET PULSE BREW

NO YES
BREW
C
BREW
C
(+)
BREW
C
BREW
C
P2862
36748 051304