Bunn ITCB Operating & Service Manual page 48

PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SPRAY OZ/M
This function allows the operator to view or to enter the
actual flow rate coming out of the sprayhead. This is
NOT used to change the actual flow rate, but to tell the
internal controller how fast the water is flowing.
Procedure to adjust the sprayhead flow rate set-
ting:
1. Press and hold the right hidden button until the
display reads SET LANGUAGE. Press the right hid-
den button until the display reads SPRAY OZ/M .
The number represents what the brewer thinks is
the flow rate out of the sprayhead.
2. If the actual flow rate of the sprayhead is known
but is different than the number on the display, use
the (-) and (+) to enter the correct flow rate.
3. When finished, press and release DONE. This saves
the new setting and advances to the next function
screen, DILUTE OZ/M. To exit programming and
return to the MAIN SCREEN, press and release the
ON/OFF pad.
SPRAY OZ/M: XX.X
(-)
BREW
A
DILUTE OZ/M: XX.X
(-)
BREW
A
Page 48
DONE (+)
BREW
BREW
B
C
DONE (+)
BREW BREW
B C
P2877
36748 041504