Set Recipe Temps - Bunn ITCB Operating & Service Manual

PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
BREW COUNTERS
This function allows the operator to track the total num-
ber of brew cycles completed, as well as the number of
batches brewed using each of the brew buttons. There
are three resettable counters, and one life counter that
is not resettable.
Procedure to view/reset the brew counters:
1. Press and hold the right hidden button until the dis-
play reads SET LANGUAGE. Press the right hidden
button until the display reads BREW COUNTERS.
2. Pressing NO will advance to the next programming
function, RECIPE TEMP. Press YES to view the first
brew counter (TOTAL LIFE BREWS). This number
represents the total number of brew cycles this
brewer has completed. This counter is non-reset-
table. Press NEXT to advance to the next brew
counter, BREW A.
3. This counter represents the number of brews for
Brew A. To reset the counter to zero, press and
release RESET. Press and release NEXT to advance
to the next counter.
4. Repeat step 3 for the remaining two counters, BREW
B and BREW C.
5. When finished, press NEXT to advance to the next
programming function, SET RECIPE TEMPS. To
exit programming, press and release the ON/OFF
button to return to the MAIN SCREEN.
PRESSING NO WILL
ADVANCE TO
RECIPE TEMPS
Page 52
BREW COUNTERS?
NO YES
BREW BREW BREW
A B C
TOTAL LIFE BREWS
XXXX NEXT
BREW BREW BREW
A B C
BREW A XXXX
NEXT RESET
BREW BREW BREW
A B C
BREW B XXXX
NEXT RESET
BREW BREW BREW
A B C
BREW C XXXX
NEXT RESET
BREW BREW BREW
A B C

SET RECIPE TEMPS

NO YES
P2881
36748 041504