Table of Contents
Advertisement
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET UNITS
This function allows the operator to change the
units of measure from METRIC to ENGLISH.
UNITS
METRIC
Procedures to set UNITS:
1. Press and hold the ® pad until the display reads
WARMER OFF. Release the ®. Press and release
the ® pad until the display reads UNITS.
2. The METRIC or ENGLISH flashes to indicate the
current selection.
3. Changing the current selection will cancel all pre-
viously entered recipes and return to FACTORY
DEFAULT values.
4. When finished, press and release DONE. This will
save the new setting, exit the function screen and
advance to the next. Another alternative is to press
the "ON/OFF/LOWER" pad located on the front
switch panel to exit the UNITS function and return
to the MAIN SCREEN.
ENGLISH
P3227
Page 35
37467 110904
Advertisement
Table of Contents
