Set Drip Times - Bunn ingle Multi- BrewWISEDBC WITH SMART FUNNELTM Installation And Operating Manual

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
DRIP TIME
This function allows the setting of a period of time
at the end of a brew cycle to ensure that liquid has
emptied out of the funnel prior to returning to READY
TO BREW.
Procedure to modify drip times:
Range: OFF to 10 minutes for all batch sizes.
NOTE: If the brewer is already in the DRIP TIMES
screen, it is not necessary to follow steps 1 through 10
in this section, but proceed directly to step 11.
1. Press and hold the ® pad until the display reads
WARMER OFF. Release the ® pad. Press the ®
until the display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now
read NO NAME, along with MODIFY and NEXT.
3. Press and release NEXT to advance to the desired
coffee name to be modified.
4. Press and release MODIFY. The display should
read BREW MI/M.
5. Press and release DONE. The display should read
BATCHES DONE?.
6. Press and release YES. The display should now
read % DILUTION.
7. Press and release DONE. The display should read
BATCHES DONE?.
8. Press and release YES. The display should now
read SET PULSE BREW.
9. Press and release NO. The display should now
read SET PREINFUSION.
10. Press and release NO. The display should now
read DRIP TIME, along with either the word OFF,
or a time will be showing. A batch light should also
be blinking.
11. Using the (-) and (+), set the amount of time from
when the brew solenoid shuts off to when drip-out
occurs for that batch size.
NOTE: Set to OFF to disable this function. To set to
OFF, press and release (-) until OFF is displayed.
12. When finished, press another batch size and re-
peat step 11 until all batches are set.
13. When finished, press DONE. The display should
read BATCHES DONE?
14. If all batch sizes are set correctly, press YES. The
screen should show the name of the coffee flavor
being programmed (modified) along with SETUP
COMPLETE.
15. After a 5 second delay, the display will advance to
the next coffee name in the brewer's memory. If no
other coffee names are present, the display will
read THAT WAS THE LAST RECIPE, and return to
the REVIEW RECIPES screen.
REVIEW RECIPES?
NO
EXIT TO
NEXT
FUNCTION
SCREEN
NO-NAME
MODIFY
SCREEN DISPLAYED
BREW OZ: XX.XX
BATCHES DONE?
% DILUTION XX.X
BATCHES DONE?
SET PULSE BREW?
SET PREINFUSION?
DRIP TIME X:XX
(-) DONE
BATCHES DONE?
NO
(RECIPE NAME)
SETUP COMPLETE
Page 29
YES
NEXT
ADVANCES TO ALL OTHER
RECIPE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
PRESS
DONE
YES
DONE
(RECIPE NAME)
YES
NO
MODIFY
NO
(+) WHEN THE LAST RECIPE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
YES
EXITS TO THE NEXT RECIPE NAME
IN THE BREWER'S MEMORY. IF NO
OTHER RECIPE NAMES ARE
ENTERED IN THE BREWER'S
MEMORY, THE DISPLAY WILL READ:
THAT WAS THE
LAST RECIPE
NEXT
P3220
37467 110904