Creating A "Custom" Beverage; Set Espresso Shots - Bunn Crescendo Programming Manual

CREATING A "CUSTOM" BEVERAGE

A "CUSTOM" beverage may be edited/created for any dispense switch location. It is recommended that the
touch switch graphic insert be replaced with one which matches the beverage reassignments made in this
mode. All settings can be adjusted to preference.
►

Set Espresso Shots

The sub-menus for adjusting an espresso shot are located under this option.
STEP 1
• Set the toggle switch to
PROGRAM MODE.
SM ESP GRIND TIME
(-) #.# sec (+)
1. SELECT SIZE
Use to Use to
decrease increase
STEP 4
• Sets the grinder run time for a
small spresso shot.
• Navigate to the next setting.
SM DWELL TIME
(-) #.# sec (+)
1. SELECT SIZE
Use to Use to
decrease increase
STEP 7
• Sets the dwell time for a
small espresso.
• Navigate to the next setting.
OPERATING CONTROLS AND INTERFACE
PROGRAM MODE
PRESS TO ENTER
1. SELECT SIZE
STEP 2
• Advance to the SET ESPRESSO
SHOTS screen.
TEST SM GRIND TM
PRESS DISPENSE
1. SELECT SIZE
Use to
Navigate
STEP 5
• Press a dispense switch to
perform a catch test for a grind.
• Navigate to the next setting.
SM BREW VOLUME
(-)
1. SELECT SIZE
Use to Use to
Navigate decrease
STEP 8
• Sets the total brew volume for
a small espresso shot. The
numeric value is flow ticks.
• Navigate to the next setting.
Use to Navigate
Use to
Navigate
95 (+)
Use to Use to
increase Navigate
8
SET ESPRSO SHOTS
EXIT YES
1. SELECT SIZE
Use to Select
STEP 3
• Press SELECT.
SM PREINFUSION
(-) #.# sec (+)
1. SELECT SIZE
Use to Use to
decrease increase
STEP 6
• Sets the espresso pump run
time for pre-infusion of tamped
coffee. Zero seconds for no
pre-infusion.
• Navigate to the next setting.
LG ESP GRIND TIME
(-) #.# sec
1. SELECT SIZE
Use to Use to
decrease increase
STEP 9
• The settings will repeat for the
large espresso shot.
continued >
Use to
Navigate
(+)
Use to
Navigate