Table of Contents
Advertisement
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
% DILUTION
This function allows adjustment of the amount of
water that flows passed the grounds. The number
signifies the percentage of the brew volume which
does not flow over the coffee grounds/tea.
Modifying recipes - dilution percentages:
Range: 0% to 90% for all batch sizes
NOTE: If the brewer is already in the % DILUTION
screen, it is not necessary to follow steps 1 through 6
in this section, but proceed directly to step 7.
1. Press and hold the ® pad until the display reads
WARMER OFF. Release the ® pad. Press the ®
until the display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now
read NO NAME, along with MODIFY and NEXT.
3. Press and release NEXT to advance to the desired
recipe name to be modified.
REVIEW RECIPES?
NO
EXIT TO
NEXT FUNCTION
SCREEN
NO-NAME
MODIFY
BREW MI/M XX.X
(-)
DONE
(+)
BATCHES DONE?
NO
YES
% DILUTION XX
(-)
DONE
(+)
BATCHES DONE?
NO
YES
SET PULSE BREW?
NO
YES
Page 23
4. Press and release MODIFY. The display should
read BREW MI/M.
5. Press and release DONE. The display should read
BATCHES DONE?.
6. Press and release YES. The display should now
read % DILUTION, and a batch light will be blink-
ing. Press and release the batch size to be modi-
fied.
7. Using (-) and (+) set the amount of dilution water
(percentage) to be dispensed around the grounds
for that particular batch size.
8. When finished, press another batch size and re-
peat step #7 for each batch to be modified.
9. When finished setting all batch sizes, press DONE.
The display should read BATCHES DONE?
10. If they are not correct, press and release NO to
return to the % DILUTION setup screen.
11. If all batch sizes are correct, press YES. This will
advance to SET PULSE BREW. Another alternative
is to press the "ON/OFF/LOWER" pad to exit the %
DILUTION setup and return to the MAIN SCREEN.
YES
NEXT
ADVANCES TO ALL OTHER
RECIPE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
(RECIPE NAME)
MODIFY
NEXT
WHEN THE LAST RECIPE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
THAT WAS THE
LAST RECIPE
SEE MODIFYING
PULSE BREW ON
THE FOLLOWING PAGE
OR PRESS AND RELEASE
ON/OFF PAD TO EXIT THE
% DILUTION SETUP AND
RETURN TO THE MAIN SCREEN
P3214
37467 110904
Advertisement
Table of Contents
